Introduction

The vacuum degreasing sintering furnace has the functions of degreasing and sintering, and is used for the integrated processing of negative pressure degreasing, degassing and high-temperature sintering in MIM (metal powder injection molding).

Features

• A square sealed box can be installed in the furnace chamber. On the one hand, it makes the furnace space more compact and improves utilization; it can also reduce the consumption of gas and heating power; the most important thing is to prevent the degreasing and volatile gas from contaminating the inner wall of the furnace and the insulation material,discharge all volatile gases out of the furnace.

• The inert gas (N2) is directly charged into the furnace chamber, and the pre-vacuum of the furnace chamber is used to effectively perform negative pressure degreasing.

• Multi-layer graphite backing plate effectively utilizes the furnace space for loading materials.

• Heating elements adopt graphite rods, and the insulation layer is made of imported high purity graphite composite carbon felt.

• The max heating temperature can reach 1600 degrees, and multi- zone temperature control is adopted to greatly improve the temperature uniformity.

• Adopt mechanical pump + Roots pump vacuum unit, it can vacuum to 10Pa in 10 minutes.

Technical Parameters